Compact Structure Horizontal Multistage Pumps 300m High Building Supply Water Pumps

Product Description

300m high building supply water pumps electric horizontal multistage centrifugal pump

horizontal multistage centrifugal pump overview:

It has compact structure,less vibration,high efficiency, mechanical seal,all parts touched with water can be made of stainless steel.

It's special used in low pressure,all parts touch with liquid can be of stainless steel materials,cast iron materials is mainly for the clean water and physically chemically similar to clean water liquid,cast steel materials is for the mine water liquid with small liquid as it can anti abrasive, well,SS materials is for the corrosive liquid, for the sea water, it will be 316L SS or even better materials

1. Diameter: 40-300mm
2. Capacity: 3.7-850m3/h
3. Head: 78-1302m
4. Power: 15-2240kw
5. Types: high temperature type, anti-corrosive type
6. Install: surface water pump, horizontal

horizontal multistage centrifugal pump parameters:

(It is regular submersible pump type in Shenlong pump factory, high temperature and 380v/440v/480v/600v/660v, etc. Please kindly choose submersible pump type you are interested.)

horizontal multistage centrifugal pump application use:

1.Long distance water transferring

2. Boiling water feeding and transferring

3. Fire fighting

4. Water system boosting

5. Mining industry

6. Power station and water plant

7. Offshore projects

horizontal single suction multistage segmented centrifugal pump, the head can increase or decrease the number of pump stages.The working chamber of the pump is formed by inlet section, middle section, guide vanes, outlet section guide vanes, outlet section and end cap.The liquid enters from single side along with the direction of shaft.The axial force generated by pump operation is balanced by the balance disc.

1 Shaft seal: soft packing or mechanical seal,according to user’s requirements.

2 Transmission: driven by the motor directly through the elastic coupling.

3 Sealing ring: to prevent high pressure water in the pump from leaking back into the inlet.It is replaceable after wear.

4 Balance disc: located between the outlet section and the end cap for balancing axial forces.

5 Balance ring and balance sleeve: fixed on the water outlet section.To form the balance device together with balance disc.

6 Shaft sleeve: located in the two packing chambers, which can be replaced after wear.