400m3/H 450m3/H High Flow Stainless Steel Well Pump Sewage Treatment

Product Description

400m3/h 450m3/h High Flow Stainless Steel Well Pump Sewage Treatment

400m3/h 450m3/h High Flow Stainless Steel Well Pump Sewage Treatment Features:

The biggest feature of the deep well pump is that the motor and the pump are integrated. It is a pump that is immersed in the groundwater well for pumping and transporting water. Stainless steel deep well pumps are widely used in farmland drainage and irrigation, industrial and mining enterprises, urban water supply and drainage and sewage treatment, etc. . There are no special requirements for well pipes and water pipes (namely: steel pipe wells, gray pipe wells, earth wells, etc. can be used; under pressure permitting, steel pipes, rubber pipes, plastic pipes, etc. can be used as water pipes). The installation, use and maintenance of deep well pumps are convenient and simple, with a small footprint and no need to build a pump room.

400m3/h 450m3/h High Flow Stainless Steel Well Pump Sewage Treatment Model:

Before Use 400m3/h 450m3/h Stainless Steel Well Pump :

1. Before use, it should be filled with clean water, and the water injection and air release bolt should be tightened, otherwise it is not allowed to use.

2. Land trial operation is not allowed.

3. Electric pumps are not allowed to be used lying down or tilted.

4. The motor should be submerged in water, but the submersion depth should not be greater than 70 meters.

5. Lead wires and cable joints shall be operated according to regulations.

400m3/h 450m3/h High Flow Stainless Steel Well Pump Sewage Treatment Conditions of use:

1. A three-phase AC power supply with a rated frequency of 50HZ and a rated voltage of 380±5%V.

2. The water inlet of the pump should be 1 meter below the dynamic water level, but the diving depth should not exceed 70 meters below the static water level, and the bottom of the motor should be more than 1 meter deep from the bottom of the well.

3. The water temperature should generally not be higher than 20°C.

4. Water quality requirements: (1) The sand content in the water is not more than 0.01 (weight ratio);

(2) PH value is in the range of 6.5~8.5;

(3) Chloride ion content is not more than 400 mg/L.

5. It is required that the well is at the right value, the well wall is smooth, and no well pipes are staggered.

400m3/h 450m3/h High Flow Stainless Steel Well Pump Sewage Treatment Photo:

400m3/h 450m3/h High Flow Stainless Steel Well Pump Sewage Treatment contact us:

When ordering QJH deep well pumps, you need to check with our sales staff the model of QJH deep well pumps, the motor power of QJH multistage deep well pumps, the voltage and materials of multistage submersible pumps. When the environment used is relatively complicated, please provide design drawings and detailed parameters as much as possible, and our engineers from Shenlong Pump Industry will review and check for you. If you have selected our company's QJH stainless steel deep well pump, please place an order directly with our sales staff!