High Pressure Electrical Mine Drainage Water Submersible Pump

Product Description

High Pressure 380v 460v 1100v 3000v 6000v Electrical Mine Drainage Water Submersible Pump

How to get a formal quotation quickly?

1. What's flow rate and head meters you want?

2. Is it clean water or drainage water?
3. If it is drainage water, is there too much solid in the water?

Mine water submersible pump types:

(Notice: flow rate, head meters, voltage and material or other SPECIAL specifications, ODM OEM is acceptable)

  Mine water submersible pump is widely applied in the fields of mine production drainage, emergency rescue drainage of permeable accident, mine restorative drainage, which makes a good guarantee for mine production drainage and rescue. Zhengzhou Shenlong Pump Industry CO.,Ltd produces mine submersible pumps with a flow of 80-2000 cubic meters per hour and a lift of 16-900 meters; The motor power supply is up to 4200kw.

--Flow rate: 80m3/h-2000m3/h

--Head meters: 16m-900m

--Voltage: 380v/440v/460v/480v/660v/1100v/3000v/6000v or as per request

--Frequency: 3 phase 50hz/60hz

--Material: cast iron or stainless steel, or as per request

--Install: Vertical or horizontal

Special submersible mine pump specifications, inquiry or E-mail please. We have casting molds workshops and R&D centers to design and manufacture a new water pump type according to your local site.

What you have to do before running mine submersible water pump?

1. The motor must be filled with clean water fully.

2. The instructions must be read carefully before installation and use. Or contact us directly.

3. Ensure the flow rate of water on the surface of the motor. If it cannot be guaranteed, install a deflector (cooling water cover).

5. The water pump fully submerged into water, and the minimum water level shall be 2m higher than the pump inlet during operation.

6. If it is necessary that testing running the submersible pump on the ground, the pump cavity must be filled with water. Otherwise, the sliding bearing will be damaged.

FAQ

Q:How to customize pumps and mechanical seals ?

A:Customers could send us application data or drawings , we will select suitable pump and seal .

Q:How long is production lead time?

A:Depends on quantity and water pump types, the normal small amount production is about 7-25 days.

Q:What’s type of shipping?

A:Usually by sea, and will be based on the customer's destination to choose the most favorable most appropriate way

Q:What is the shipping terms you can provide?

A:Depends on customer's requirements, we can provide different transportation terms,

such as EXW, FOB, CIF.

Q:How can I pay for my items? What is the payment you can provide?

A:Usually by T/T, 50% down payment once PI confirmed, the balance will be paid after inspection and before shipment. L/C at sight.