logo
Home > Products > Stainless Steel Submersible Pump >
25kW 20 m³/h 243 m Head Cast Stainless Steel Deep Well Submersible Pump for Sprinkler Irrigation

25kW 20 m³/h 243 m Head Cast Stainless Steel Deep Well Submersible Pump for Sprinkler Irrigation

cast stainless steel submersible pump

sprinkler irrigation pump

243 m head well pump

Place of Origin:

China

Brand Name:

SLAPK

Certification:

CE, ISO9001

Model Number:

200QJH20-243/18

Contact Us
Request A Quote
Product Details
Model:
200QJH20-243/18
Motor Power:
25 KW (35 Hp)
Nominal Flow:
20 M³/h
Flow Range:
18-22 M³/h
Nominal Head:
243 M
Head Range:
206-280 M
Stages:
18
Outlet Size:
2.5 Inch
Pump Material:
Cast Stainless Steel Hydraulic Components
Protection Class:
IP68 (QJ Series)
Supply:
Voltage, Frequency And Phase Confirmed With The Order
Certification:
CE, ISO9001
Minimum Order Quantity:
To Be Confirmed In The Quotation
Delivery Time:
Lead Time Will Be Stated In The Quotation Based On The Order Configuration And Quantity
Warranty:
Warranty Terms Will Be Specified In The Quotation
Application:
Sprinkler Irrigation Projects
Highlight:

cast stainless steel submersible pump

,

sprinkler irrigation pump

,

243 m head well pump

Payment & Shipping Terms
Price
Quoted according to the selected configuration.
Packaging Details
Specified in the quotation.
Delivery Time
Lead time will be stated in the quotation based on the order configuration and quantity
Supply Ability
Made to the confirmed order configuration.
Product Description

25kW 20 m³/h 243 m Head Cast Stainless Steel Deep Well Submersible Pump for Sprinkler Irrigation

Product Introduction

We assess this model for sprinkler irrigation projects where the required flow and total head match its performance curve. It is an 18-stage cast stainless steel deep well submersible pump driven by a 25 kW motor, with a nominal flow of 20 m³/h and a nominal head of 243 m.

Water enters at the inlet section, is lifted through the impellers and diffusers and leaves through the 2.5 inch outlet. The unit runs below the water surface in the borehole.

Whether a sprinkler layout suits this model depends on the total head it needs, not on the irrigation method alone. The well lift, the delivery elevation, the pipeline losses and the pressure required at the sprinkler inlet are checked together.

Main Technical Specifications

  • Model: 200QJH20-243/18
  • Motor power: 25 kW (35 hp)
  • Nominal flow: 20 m³/h
  • Flow range in catalog: 18–22 m³/h
  • Nominal head: 243 m
  • Head range in catalog: 206–280 m
  • Stages: 18
  • Outlet size: 2.5 inch
  • Pump material: cast stainless steel hydraulic components
  • Protection class: IP68 (QJ series specification)
  • Installation: vertical

Main Applications

Sprinkler irrigation is the intended application area. The pressure at the sprinkler inlet has to be met while the zones are switched, and that requirement is part of the total head calculation.

Holding pressure when zones change is a control and system design matter rather than something the pump guarantees on its own. It has to be reviewed with the zone demand and the control scheme for the project.

Materials and Construction

The hydraulic components are manufactured by casting. The stainless steel grade and component scope are specified in the quotation according to the water quality and project requirements.

Points to Check Before Selection

1. Catalog ranges and the operating point. The flow and head figures above are the catalog ranges listed for this model. The required operating point must be checked against the performance curve for the quoted configuration. The maximum catalog flow and maximum catalog head should not be combined as a guaranteed operating point.

2. Total head includes the sprinkler inlet pressure. The head the pump must produce is the pumping water level below the wellhead, plus the delivery elevation, plus the friction loss in the rising main and pipeline, plus the pressure required at the sprinkler inlet. Ignoring the pressure required at the irrigation system inlet can underestimate the total head and result in insufficient operating pressure.

3. Well diameter is confirmed from the drawing. The 2.5 inch figure is the discharge connection, not the outside diameter of the pump. The 200 in the model name identifies the catalog series, and the required borehole diameter is confirmed from the installation drawing for the selected assembly.

Motor and Supply Configuration

The motor rating for this model is 25 kW. Please provide the supply voltage, frequency and phase. The motor rating, rated current and electrical configuration will be confirmed for the selected assembly. Performance data will correspond to the specified frequency.

Cable length and conductor size are selected according to the complete cable route, motor rating, supply voltage, voltage drop and installation requirements. The supplied cable specification will be stated in the quotation.

Production and Testing

Each pump is built to the configuration confirmed on the order, tested at our works before packing, and released for delivery after it passes.

The quotation will specify the supplied motor lead cable, any extension cable, control equipment and accessories.

Do not run the pump dry. The installation must maintain the minimum submergence and motor cooling conditions specified for the selected assembly.

The minimum order quantity is to be confirmed in the quotation. Lead time will be stated in the quotation based on the order configuration and quantity. Warranty terms will be specified in the quotation. Packing is specified in the quotation.

Frequently Asked Questions

1. Can this pump run sprinklers directly?
It can be assessed for direct sprinkler supply where the required flow and total head match its performance curve. Send the zone layout and the required inlet pressure so the operating point can be checked.

2. Will the pump hold pressure when zones change?
That depends on the zone demand and the control scheme. Pressure regulation and zone control are reviewed as part of the system design, not assumed from the pump alone.

3. Which stainless steel grade is supplied?
The stainless steel grade and component scope are specified in the quotation according to the water quality and project requirements.

4. What is included with the pump?
The quotation will specify the supplied motor lead cable, any extension cable, control equipment and accessories.

5. What information do you need?
The required flow and total head, well data, water levels, sprinkler inlet pressure, pipeline data, supply voltage, frequency and phase, quantity and destination.

Request a Quotation

To assess this model and prepare a quotation, please send us:

  • Model or application
  • Required flow
  • Required total head, if known
  • Well internal diameter and total depth
  • Static water level below the wellhead
  • Pumping water level below the wellhead
  • Planned installation depth, if known
  • Delivery elevation
  • Pipeline length and diameter
  • Required outlet pressure, if applicable
  • Water temperature, quality and sand content
  • Material requirements
  • Voltage, frequency and phase
  • Cable length and control requirements
  • Quantity and delivery destination

You can leave any item you do not know blank. We will check the operating point on the performance curve and reply with the configuration, price and lead time.

Send your inquiry directly to us

Privacy Policy China Good Quality Submersible Water Pumps Supplier. Copyright © 2018-2026 Zhengzhou Shenlong Pump Industry CO.,Ltd . All Rights Reserved.