Place of Origin:
China
Brand Name:
SLAPK
Certification:
CE, ISO9001
Model Number:
200QJH20-351/26
Our 200QJH20-351/26 is a 26-stage deep well submersible pump for large farm irrigation systems. A 45 kW motor drives it at a nominal flow of 20 m³/h and a nominal head of 351 m. It is the first model in the family to use the 45 kW motor and the 3 * 25 mm² cable, so the electrical and mechanical package is a clear step above the 37 kW versions.
The hydraulic components are cast stainless steel, which gives the bowl the rigidity that twenty-six stages require. Water enters at the inlet section, is lifted through the stack and discharged through the 2.5 inch outlet.
At this point in the family the pump is usually part of a larger system: a deep borehole, a long rising main, a storage tank and a distribution network. The pump selection and the system layout have to be checked together, because the head margin sits in the pipework as much as in the pump.
Large farm irrigation is the main application: the pump supplies a main line that serves several blocks or a whole property, often through a storage tank that buffers the demand. The 351 m nominal head covers a deep pumping level plus the lift to the tank and the losses in a long main.
It is also used for filling reservoirs and for moving water between storage points on a property where the delivery elevation is high.
The hydraulic components are manufactured by casting. The stainless steel grade and component scope are specified in the quotation according to the water quality and project requirements.
1. Catalog ranges and the operating point. The flow and head figures above are the catalog ranges listed for this model. The required operating point must be checked against the performance curve for the quoted configuration. The maximum catalog flow and maximum catalog head should not be combined as a guaranteed operating point.
2. Electrical data is confirmed for the assembly. The motor rating, rated current, cable and protection are confirmed for the selected assembly. Cable length and conductor size are selected according to the complete cable route, supply voltage, voltage drop and installation requirements.
3. Total head includes the network. Pumping water level, delivery elevation, rising main friction and the loss through the distribution network all count. A long main line can consume a large part of the 351 m before the water reaches the field.
The motor rating for this model is 45 kW. Please provide the supply voltage, frequency and phase. The motor rating, rated current and electrical configuration will be confirmed for the selected assembly. Performance data will correspond to the specified frequency.
Cable length and conductor size are selected according to the complete cable route, motor rating, supply voltage, voltage drop and installation requirements. The supplied cable specification will be stated in the quotation.
Each pump is built to the configuration confirmed on the order, tested at our works before packing, and released for delivery after it passes.
The quotation will specify the supplied motor lead cable, any extension cable, control equipment and accessories.
Do not run the pump dry. The installation must maintain the minimum submergence and motor cooling conditions specified for the selected assembly.
The minimum order quantity is to be confirmed in the quotation. Lead time will be stated in the quotation based on the order configuration and quantity. Warranty terms will be specified in the quotation. Packing is specified in the quotation.
1. Can this pump supply a whole property?
It can supply a property with a buffered layout, meaning a tank or reservoir between the pump and the field network. The daily volume depends on the running hours at 20 m³/h.
2. What electrical supply does it need?
The motor draws 96.9 A at the nominal point, and the supply voltage and frequency are confirmed on the order. The starter and protection must be sized for that current.
3. Is the cable included in the pump price?
No. Cable length and conductor size are selected according to the complete cable route, motor rating, supply voltage, voltage drop and installation requirements, and the supplied cable specification is stated in the quotation.
4. Which stainless steel grade is supplied?
The stainless steel grade and component scope are specified in the quotation according to the water quality and project requirements.
5. What do you need to quote?
Required flow and total head, well diameter and depth, water levels, tank height, mainline length and diameter, supply voltage and frequency, quantity and destination.
To select the right build and give you a firm quotation, please send us:
You can leave any item you do not know blank. We will confirm the duty point on the curve and reply with the configuration, price and lead time.
Send your inquiry directly to us