logo
Home > Products > Stainless Steel Submersible Pump >
37kW 20 m³/h 297 m Head Cast Stainless Steel Deep Well Submersible Pump for Irrigation Mainline Supply

37kW 20 m³/h 297 m Head Cast Stainless Steel Deep Well Submersible Pump for Irrigation Mainline Supply

cast stainless steel well pump

irrigation mainline pump

37kW submersible pump

Place of Origin:

China

Brand Name:

SLAPK

Certification:

CE, ISO9001

Model Number:

200QJH20-297/22

Contact Us
Request A Quote
Product Details
Model:
200QJH20-297/22
Motor Power:
37 KW (50 Hp)
Nominal Flow:
20 M³/h
Flow Range:
18-22 M³/h
Nominal Head:
297 M
Head Range:
252-341 M
Stages:
22
Outlet Size:
2.5 Inch
Pump Material:
Cast Stainless Steel Hydraulic Components
Protection Class:
IP68 (QJ Series)
Application:
Irrigation Mainline Supply, Storage Filling
Certification:
CE, ISO9001
Minimum Order Quantity:
To Be Confirmed In The Quotation
Delivery Time:
Lead Time Will Be Stated In The Quotation Based On The Order Configuration And Quantity
Warranty:
Warranty Terms Will Be Specified In The Quotation
Supply:
Voltage, Frequency And Phase Confirmed With The Order
Highlight:

cast stainless steel well pump

,

irrigation mainline pump

,

37kW submersible pump

Payment & Shipping Terms
Price
Quoted according to the selected configuration.
Packaging Details
Specified in the quotation.
Delivery Time
Lead time will be stated in the quotation based on the order configuration and quantity
Supply Ability
Made to the confirmed order configuration.
Product Description

37kW 20 m³/h 297 m Head Cast Stainless Steel Deep Well Submersible Pump for Irrigation Mainline Supply

Product Introduction

Our 200QJH20-297/22 is a 22-stage deep well submersible pump for irrigation mainline supply. A 37 kW motor drives it at a nominal flow of 20 m³/h and a nominal head of 297 m. It is the first model in the family to use the 37 kW motor, so it marks a step change in current, cable size and starting arrangement.

The hydraulic components are cast stainless steel. Water is drawn in at the inlet section and lifted through twenty-two stages before leaving through the 2.5 inch outlet. The pump sits below the water surface in the borehole and holds its prime when it is installed within the submergence conditions specified for the selected assembly, which matters on a mainline that runs for long hours.

Because the family keeps the same 20 m³/h nominal flow from 30 m to 405 m head, a designer can move up the range as the confirmed head grows without changing the outlet, the rising main or the field layout.

Main Technical Specifications

  • Model: 200QJH20-297/22
  • Motor power: 37 kW (50 hp)
  • Nominal flow: 20 m³/h
  • Flow range in catalogue: 18–22 m³/h
  • Nominal head: 297 m
  • Head range in catalogue: 252–341 m
  • Stages: 22
  • Outlet size: 2.5 inch
  • Pump material: cast stainless steel hydraulic components
  • Protection class: IP68 (QJ series specification)
  • Installation: vertical

Main Applications

Irrigation mainline supply is the main application: the pump pushes water from a deep borehole into a buried main that feeds several blocks, hydrants or a storage tank at the top of the site. The 297 m nominal head covers the pumping water level, the delivery elevation and the friction loss in the main.

It is also used where a single pump has to serve both an irrigation line and a stock or domestic supply point, provided the duty point and the control arrangement are checked together.

Materials and Construction

The hydraulic components are manufactured by casting. The stainless steel grade and component scope are specified in the quotation according to the water quality and project requirements.

Points to Check Before Selection

1. Catalog ranges and the operating point. The flow and head figures above are the catalog ranges listed for this model. The required operating point must be checked against the performance curve for the quoted configuration. The maximum catalog flow and maximum catalog head should not be combined as a guaranteed operating point.

2. Electrical data is confirmed for the assembly. The motor rating, rated current, cable and protection are confirmed for the selected assembly. Cable length and conductor size are selected according to the complete cable route, supply voltage, voltage drop and installation requirements.

3. Total head is not the same as well depth. Total head is the pumping water level below the wellhead, plus the delivery elevation, plus the friction loss in the rising main and discharge pipe. Well depth alone does not size the pump.

Motor and Supply Configuration

The motor rating for this model is 37 kW. Please provide the supply voltage, frequency and phase. The motor rating, rated current and electrical configuration will be confirmed for the selected assembly. Performance data will correspond to the specified frequency.

Cable length and conductor size are selected according to the complete cable route, motor rating, supply voltage, voltage drop and installation requirements. The supplied cable specification will be stated in the quotation.

Production and Testing

Each pump is built to the configuration confirmed on the order, tested at our works before packing, and released for delivery after it passes.

The quotation will specify the supplied motor lead cable, any extension cable, control equipment and accessories.

Do not run the pump dry. The installation must maintain the minimum submergence and motor cooling conditions specified for the selected assembly.

The minimum order quantity is to be confirmed in the quotation. Lead time will be stated in the quotation based on the order configuration and quantity. Warranty terms will be specified in the quotation. Packing is specified in the quotation.

Frequently Asked Questions

1. How is this model different from the 283 m version?
One more stage, a higher nominal head, and the move from a 30 kW to a 37 kW motor. Flow and outlet stay the same, but the electrical package is heavier.

2. Can it feed more than one irrigation block?
Yes, if the total head at the furthest outlet stays within the curve. Send the layout and pipe sizes so we can check the worst case.

3. Is a soft starter or VFD needed?
It depends on the supply capacity and the starting current allowed at site. We confirm the starting method in the quotation once the supply data is known.

4. What stainless steel grade is used?
The stainless steel grade and component scope are specified in the quotation according to the water quality and project requirements.

5. What information do you need?
Required flow and total head, well depth and water levels, mainline length and diameter, supply voltage and frequency, quantity and destination.

Request a Quotation

To select the right build and give you a firm quotation, please send us:

  • Model or application
  • Required flow
  • Required total head, if known
  • Well internal diameter and total depth
  • Static water level below the wellhead
  • Pumping water level below the wellhead
  • Planned installation depth, if known
  • Delivery elevation
  • Pipeline length and diameter
  • Required outlet pressure, if applicable
  • Water temperature, quality and sand content
  • Material requirements
  • Voltage, frequency and phase
  • Cable length and control requirements
  • Quantity and delivery destination

You can leave any item you do not know blank. We will confirm the duty point on the curve and reply with the configuration, price and lead time.

Send your inquiry directly to us

Privacy Policy China Good Quality Submersible Water Pumps Supplier. Copyright © 2018-2026 Zhengzhou Shenlong Pump Industry CO.,Ltd . All Rights Reserved.